Today, I’m showing you why you don’t need to spend money on The Spectrum to enjoy ZX Spectrum games. Emulation is easier, especially if you own a Raspberry Pi.
Released in 1982 in the UK and Europe, the British-built ZX Spectrum was a budget home computer that contributed hugely to the early home computing industry. Competing mainly against the Commodore 64, the ZX Spectrum was a far cheaper alternative. Utilizing famous rubber keys and a basic plastic black chassis, the classic Spectrums are hard to find
Another British-built computer that you may be more familiar with is the Raspberry Pi. It’s been the heart of many emulation systems and projects since it first appeared back in 2012. Several emulators are available for the Raspberry Pi that enable you to run Spectrum games, but you can go one step forward, as I have, and install a bare metal emulator like ZXBaremulator.
Rather than simply play games, ZXBaremulator provides a full emulation system for the ZX Spectrum. And give how cheap an old Raspberry Pi is, this is a smart, affordable alternative to The Spectrum, the new ZX Spectrum console from Retro Games Ltd.
Sorry, “bare metal emulator”? What?!
When running software for other platforms on a computer, the typical solutions are a virtual machine, or emulation.
Both methods require an underlying operating system, such as Windows, or Linux, to “host” the virtualization or emulation software. With bare metal emulation, however, the emulated or virtualized environment runs without an operating system.
This has various advantages, not least reduced latency. It also means that the emulated environment can boot far quicker than it can when “piggybacking” the usual OS.
What Is a ZX Spectrum Computer?
An 8-bit computer released in 1982, the ZX Spectrum sold 5 million units until its retirement in 1992. While recognizable by the rainbow motif on the original and subsequent models, few original ZX Spectrum computers made it to the USA. Instead, licensed clones were produced, such as the Timex T/S 2068. Elsewhere, such as in Eastern Europe, Russia, and south-east Asia, unofficial clones were released.
As with most 8-bit systems, the ZX Spectrum mainboard is housed in a case with a top-mounted keyboard. This differs in having as few keys as possible (rubber buttons, rather than keys) and offering a bunch of shortcuts for programming commands.
Data can be loaded or saved to cassette tapes, a smaller magnetic tape cartridge (using a device called the “Microdrive”) or on later models, a 3-inch CF2 (“Compact Floppy Disk”).
Many big name games were adapted for the ZX Spectrum. Movie tie-ins such as 1989’s Batman: The Movie (named to distinguish it from an earlier DC-licensed game), Capcom coin-op Ghosts’n’Goblins, and even space exploration classic Elite (the progenitor of Elite Dangerous) were all released on the ZX Spectrum.
All this despite the computer being able to handle multicolored sprites and games often lacking music.
Which Raspberry Pi Does ZXBaremulator Run On?
Any Raspberry Pi up to and including the Raspberry Pi 3 B+ can run ZXBaremulator. So, whether you have an original Raspberry Pi A or B, or even a Raspberry Pi Zero, you can all-but turn your Pi into a ZX Spectrum.
For this guide, I’ve installed ZXBaremulator on an original Raspberry Pi. The computer has been languishing in my drawer for years (since the release of the Raspberry Pi 2, in fact). I’ve been looking for a use that isn’t too taxing on the old board, and this looks like the ideal project.
Why Not Use an Emulator on Raspberry Pi OS?
Various ZX Spectrum emulators are available. Specifically compatible with the Raspberry Pi are:
Using one of these emulators on your Raspberry Pi OS is fine. In fact, you should notice little difference in performance. If your Raspberry Pi’s current operating system is set up the way you like it, there is no need to erase it with ZXBaremulator. Instead, just install an emulator.
But if you’re looking for a fast solution with minimum setup time, follow the steps below.
How to Install ZXBaremulator on Raspberry Pi
Before starting, ensure you have a compatible Raspberry Pi model and suitable SD card, formatted in FAT. You should also have a USB keyboard attached; do this before powering on or else the device will not be detected (the same goes for your game controller). You should also have the Raspberry Pi connected to a suitable display.
- Start by heading to zxmini.speccy.org and downloading allfiles.zip (linked to “All files needed in a ZIP file”).
- Next, grab the optimized kernel.img file for your model. Three options are available, depending on whether your Pi is an ARMv6, ARMv7, or ARMv8 model.
- Extract the allfiles.zip into a new directory on your computer. You’ll notice it already has a kernel.img file — replace this with the one optimized for your Pi (simply copy and paste).
- You can then copy those files (there should be 18) to the root of your formatted SD card. Accompanying these should be any ZX Spectrum TAP or TZX files you wish to run on the Raspberry Pi. You’ll have to source these yourself, but you will find hundreds of brand new, modern, original ZX Spectrum games to play free or buy at itch.io/games/tag-zx-spectrum.
Once this is done, eject the card, insert it in your Raspberry Pi, and boot it up.
Using ZXBaremulator to Run ZX Spectrum Programs
Using ZXBaremulator if you’re not familiar with the ZX Spectrum is made simpler with a pair of help screens.
A software version of the ZX Spectrum keyboard
The first, F1, is used for selecting TAP files (more on that below). The second, ALT + K, provides a visual reference of the ZX Spectrum’s keyboard (above). Hit ESC in any of these screens to return to whatever is being emulated.
By default, the keys default to the commands printed on them rather than the corresponding letter. This is very useful, but can take some getting used to.
You can input a basic program to get used to the keyboard.
- Type “10” then SHIFT + P (Print)
- Press CTRL + P (“) then enter a message (e.g. “Hi, I’m a Raspberry Pi”) and CTRL + P again to close the quotes
- Hit Enter to start a new line
- Type “20” then SHIFT + G (GO TO)
- Press R (RUN)
- Hit Enter to run the program
The basic text loop you entered will stop after a screen-full of lines, asking if you wish to stop or continue. If you choose the latter, you can end it later by pressing the keyboard’s Pause button.
To launch a TAP file, once the ZXBaremulator has booted into the ZX Spectrum, tap F1 to find the menu screen. With your keyboard’s arrow keys, select the game you wish to load, and tap SPACE.
Next, press F1 again to return to the command line. Here, press:
- CTRL + J (LOAD)
- CTRL + P twice (“”)
- Then hit Enter
The game should begin loading. You can play with the keyboard, or any controller that was plugged in when the Raspberry Pi was powered on. Standard USB controllers will work, along with PS4, Xbox 360, Xbox One, and Nintendo Switch Pro controllers.
At any point during the game you can use the two hotkeys to open the ZXBaremulator help screens.
At this point, you have everything you need to run software or program your emulated ZX Spectrum. Aside from getting your hands on an original ZX Spectrum, this is the closest you’re going to get to its authentic 40-year-old computing experience, and is far easier than waiting for your preferred online store to deliver The Spectrum…
Affiliate Disclosure: Some of the links in this post may be affiliate links, which means I may earn a small commission if you make a purchase through those links. This comes at no extra cost to you. Thank you for your support!
Christian Cawley is a writer and editor who covers consumer electronics, IT, and entertainment media. He has written for publications such as Computer Weekly, Linux Format, MakeUseOf.com, and Tech Radar.
He also produces podcasts, has a cigar box guitar, and of course, loves retro gaming.
We collect the most important retro gaming news and articles and send them to you weekly, absolutely free.